Strict STE examples
| Before | After |
|---|---|
| We have received the technical reports from HQ. | We received the technical reports from HQ. |
| The screws should be replaced. | Replace the screws. |
| The system is currently running diagnostics. | The system does diagnostic tests now. |
| Ensure file exists before running. | Make sure that the file exists before you run the command. |
| Utilize approximately 3 liters of water. | Use about 3 liters of water. |
| Perform a compression of the log files prior to upload. | Compress the log files before you upload them. |
Procedure
Before:
You should check that the reservoir has been filled with the correct fluid and attach a tube before opening the screw.
After:
- Fill the reservoir with the correct fluid.
- Attach a clear tube to the bleed screw.
- Put the free end of the tube in a container of fluid.
- Push the pedal three times. Hold the pedal down.
- Open the bleed screw one half turn.
- Close the bleed screw. Release the pedal.
Safety text
Before:
Touching the terminal could result in electrocution.
After:
WARNING: Do not touch the terminal. The terminal has a dangerous voltage.