1# Strict STE examples
2 
3| Before | After |
4|---|---|
5| We have received the technical reports from HQ. | We received the technical reports from HQ. |
6| The screws should be replaced. | Replace the screws. |
7| The system is currently running diagnostics. | The system does diagnostic tests now. |
8| Ensure file exists before running. | Make sure that the file exists before you run the command. |
9| Utilize approximately 3 liters of water. | Use about 3 liters of water. |
10| Perform a compression of the log files prior to upload. | Compress the log files before you upload them. |
11 
12## Procedure
13 
14Before:
15 
16> You should check that the reservoir has been filled with the correct fluid and attach a tube before opening the screw.
17 
18After:
19 
201. Fill the reservoir with the correct fluid.
212. Attach a clear tube to the bleed screw.
223. Put the free end of the tube in a container of fluid.
234. Push the pedal three times. Hold the pedal down.
245. Open the bleed screw one half turn.
256. Close the bleed screw. Release the pedal.
26 
27## Safety text
28 
29Before:
30 
31> Touching the terminal could result in electrocution.
32 
33After:
34 
35> WARNING: Do not touch the terminal. The terminal has a dangerous voltage.
36